ODM Mcb Breaker Manufacturers – Electromagnetic B type 10KA RCCB CAL6-100B – Changan Group
ODM Mcb Breaker Manufacturers – Electromagnetic B type 10KA RCCB CAL6-100B – Changan Group Detail:
Technical Data
Electrical Features
| Mode | Electromagnetic | ||
| Type(wave form of the earth leakage sensed)
Rated current In |
B
25,40,63,80,100A |
||
| Poles | 2P,4P | ||
| Rated voltage Ue | 2P 240V~, 4P 415V~ | ||
| Insulation voltage Ui | 500V | ||
| Rated frequency | 50/60Hz | ||
| Rated residual operation current(I△n) | 30, 100, 300mA | ||
| Rated residual making and breaking capacity (I△m) | 500A(In≤40A), 10In(In＞40A) | ||
| Short-circuit current Inc= I△c | 10,000A 10000 | ||
| SCPD fuse | |||
| Break time under I△n Rated impulse withstand voltage(1.5/50) Uimp | ≤0.1s 4000V | ||
| Dielectric test voltage at ind.Freq. for 1min | 2.5kV | ||
| Electrical life | 2,000 Cycles | ||
| Mechanical life | 4,000 Cycles | ||
Installation
| Contact position indicator | Yes |
| Protection degree
Ambient temperature(with daily average≤35℃) |
IP20
-5℃~+40℃ |
| Storage temperature | -25℃~+70℃ |
| Terminal connection type | Cable/Pin-type busbar/U-type busbar |
| Terminal size top/bottom for cable | 35mm2 18-3AWG |
| Terminal size top/bottom for busbar | 35mm2 18-3AWG |
| Tightening torque | 2.5Nm 22In-lbs |
| Mounting | On DIN rail EN60715(35mm) by means of fast clip device |
| Connection | Power supply in both directions |
Tripping Current Range
|
Lagging Angle 0° |
I△n＞0.01A 0.35I△n≤I△≤1.4I△n |
I△n≤0.01A 0.35I△n≤I△≤2I△n |
| 90° |
0.25I△n≤I△≤1.4I△n |
0.25I△n≤I△≤2I△n |
| 135° |
0.11I△n≤I△≤1.4I△n |
0.11I△n≤I△≤2I△n |
Product detail pictures:
Related Product Guide:
Sticking for the principle of "Super Quality, Satisfactory service" ,We have been striving for being a superb small business partner of you for ODM Mcb Breaker Manufacturers – Electromagnetic B type 10KA RCCB CAL6-100B – Changan Group , The product will supply to all over the world, such as: France, Qatar, Chicago, Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.
By Pag from Norwegian - 2017.11.11 11:41
Products and services are very good, our leader is very satisfied with this procurement, it is better than we expected,
By Pamela from New Orleans - 2018.09.19 18:37
Write your message here and send it to us
