Pre-insulated sleeve

Short Description:

1.Piercing connector, simple installation, need not strip the cable coat
2.Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead
3.Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector
4.Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al
5.Small electric connecting resistance, connecting resistance less than 1.1 times of the resistance of branch conductor with the same length
6.Special insulated case body, resistandce to illumination and environmental aging, the insulation strength can up to 12KV
7.Arc surface design, apply to connection with the same(different) diameter, wide connection scope(0.75mm2~400mm2)


Product Detail

Product Tags

Pre-insulated sleeve

Model Ca(bmlemS2)ize DPilaamsteicteSrl(emevme) Length (mm)
  A B C L
MJPT 16/16

16

16 20 70
MJPT 25/25

25

25 20 70
MJPT 35/35

35

35 20 98.5
MJPT 50/50

50

50 20 98.5
MJPT 70/70

70

70 20 98.5
MJPT 95/95

95

95 25 135
MJPT 120/120

120

120 25 150

Material: Aluminum alloy
Product property: MJPT is designed to connect the insulated cable (include ABC cable) in aerial distribution network. It is in accordance with NFC33-021. The sleeve is with some tension.
And its cap can prevent the water into the barrel. It is colored differently to distinguish the cable sizes. Marked with type, cable size, die size, inner cable length and number of crimping.

Pre-insulated sleeve

Model Ca(bmlemS2 )ize DPilaamsteicteSrl(emevme) Length (mm)
 

A

B C L
MJPB 6/16

6

16 16 73.5
MJPB 10/16

10

16 16 73.5
MJPB 16/16

16

16 16 73.5
MJPB 16/25

16

25 16 73.5
MJPB 25/25

25

25 16 73.5

Material: Al-99.5%
Product property: MJPB is designed to connect the insulated cable (include ABC cable). It is in accordance with NFC33-021. The sleeve is without tension.
And its cap can prevent the water into the barrel. It is colored differently to distinguish the cable size. Marked with type, cable size, die size, inner cable length and number of crimping.

Pre-insulated sleeve

Model Cable Size (mm2 ) Plastic Sleeve Diameter(mm) Length (mm)
  A B C L
MJPTN 54.6/54.6 54.6 54.6 20 172.5
MJPTN 54.6/70 54.6 70 20 172.5
MJPTN70/70 70 70 20 172.5
MJPTN 95/95D 95 95 25 172.5

Material: Aluminum alloy
Product property: MJPTN is designed to connect the neutral messenger in aerial bundled cable. It is in accordance with NFC33-021. The sleeve is with full tension.
And its cap can prevent the water into the barrel. It is colored differently to distinguish the cable sizes. Marked with type, cable size, die size, inner cable length and number of crimping.


  • Previous:
  • Next:

  • Write your message here and send it to us